Frequently Asked Questions

For more information on our services, have a look through our most Frequently Asked Questions

Minimum Charge per job is $82.50  ( 1 to 15 Tags )

  • 16 – 100 tags $5.50 per test
  • 101 – 200 tags $5.00 per test
  • 201 – 500 tags $4.50 per test
  • 501 – 1000 tags $4.00 per test
  • 1001+ tags $3.50 per test
  • RCD ( fixed or portable ) and surge protected power board testing from $3.50 per point.

*Please note that some items require multiple tests, e.g Desktop Computers have a Hard Drive, Monitor and two IEC power cords to test for one PC.

Plug and/or socket replacement including fitting

  • 10 amp single phase plug $20 each.
  • 10 amp single phase socket $25 each. 
  • 15 amp single phase plug $20 each.
  • 15 amp single phase socket $25 each.

*Please note that the above plug and socket replacement costs are for standard duty cable. Plugs and Sockets to fit Heavy Duty and Extra Heavy Duty cable will be quoted when required.

 

We will require one car parking spot onsite for the duration of our visit. Our parking costs will be added in our final invoice if a car parking space cannot be provide by our client.

Kilometres traveled over a 50km radius from Berwick 3806 are charged at $1 per km there and back.

The OH&S Act states that if you are an:

  • Employer
  • A self employed person
  • An employee
  • A customer engaging a trade person or for that matter
  • Any person lending a portable appliance to another person

You have a duty of care under the common law and OH&S Act to ensure that the equipment or appliance is safe.

Yes, Hart’s Test And Tag Melbourne are nationally accredited testers. We provide an on-site test and tag service in Melbourne and surrounding areas. We are fully insured and compliant with current AS/NZS 3760:2010 standards.

We also hold a current White Card. This is the Prepare to Work Safely in the Construction Industry CPCCWHS1001′ training course. Holding a valid White Card means that we have completed official, certified general construction induction training with a registered organisation within Australia.

All Melbourne suburbs and country Victoria.

*Please note – Kilometres traveled over a 50km radius from Berwick 3806 are charged at $1 per km there and back.

We have the capability for you to bring your leads and/or equipment to us for smaller jobs if you are local to the Berwick 3806 area.

This is dependent on site and appliance locations. Are all the items that need to be tested and tagged in one room location or spread across multiple buildings or floors? Between 15 – 20 items per hour can be properly tested, tagged and logged. This includes a visual inspection of each item, testing, tagging and recording of results.

We provide tap and go payments if you would like to pay onsite after job completion, attracts a 2% merchant fee. EFT or Credit Card invoices can be emailed. Please note that credit card invoice payments sent via email attracts a 2.9% merchant fee on top of our price.

The appliance or lead that fails the visual inspection or electrical test must be removed from service and tagged with an appropriate out of service or warning tag so that the item is not used until it is fixed or replaced. New or repared items must then be re-tested and tagged.

For the most common environments, we recommend the following frequencies:

  • 3 months: building, construction and demolition
  • 6 months: factories, warehouses and production
  • 12 months: an environment where the equipment/supply cord is prone to flexing or open to abuse
  • 24 months: an environment where the equipment/supply cord is not prone to flexing or open to abuse

For more information, have a read through our Testing and Tagging Schedule to learn more about the intervals recommended under the AS/NZS 3760 Australian Standard.

We operate 7 days a week and after business hours when required. All our bookings are made with you at a mutual agreeable time to fit in with both of our schedules.

  1. We perform a visual inspection of the lead or appliance. ( the lead or appliance can fail at this early stage of the test )
  2. We electrically test the lead or appliance.
  3. We record the results of the electrical test.
  4. We tag the lead or appliance with the details of the re-test date.

Please head over to our contact us page, fill out your details and we will answer any questions you have within a reasonable time frame.

Test and Tag Frequently Asked Questions

Hart's Test and Tag Melbourne, for all your appliance and lead testing and tagging.

Get in touch and let’s discuss how we can ensure your electrical equipment is compliant to the AS/NZS 3760 standard.